市面上的辦公家具，大部分是經過工業加工等工藝后成型為成品，一般辦公家具采用的木材都有一些氣味，如果氣味是刺鼻的，通常是選用的原材料和油漆的質量不好。如果聞著帶有明顯清香，或刺鼻的味道也不能要。正常的就是帶

Most of the office furniture on the market is processed into finished products by industrial processes. Generally, the wood used in office furniture has some odor. If the odor is pungent, the quality of raw materials and paint is usually poor. If you smell with a distinct fragrance, or pungent taste can not be required. Normal is the belt.

1、無味識

1. No Taste

有一點點木材的氣味，但是聞著不濃不刺鼻。

It smells a bit of wood, but it's not strong or pungent.

2、看證書/報告

2. Look at certificates/reports

木質辦公家具的甲醛含量不能大于1.5毫克/升，一般市場上的正規廠家都會有國家標準的《室內裝飾材料辦公家具有害物質限量》的證書報告。沒有的話，建議不要購買。有證書報告的話也要選擇標準為E1級的相關檢測報告。

The formaldehyde content of wooden office furniture should not be greater than 1.5 mg/l. Normal manufacturers on the market will have the certificate report of the National Standard "Limit of Harmful Substances in Interior Decoration Material Office Furniture". If not, do not buy. If there is a certificate report, the relevant test report with the standard of E1 should also be selected.

3、看細節

3. Look at the details

從做工來看，主要看表面的板材是否有劃痕、壓痕、鼓泡、脫膠起皮和膠痕等缺陷;木紋圖案應自然流暢，屬天然木質，自然而成;對于辦公桌，更要注意辦公家具的色彩搭配和紋理。

From the perspective of workmanship, it mainly depends on whether there are scratches, indentations, bubbles, degumming, peeling and glue marks on the surface of the board; the wood pattern should be natural and fluent, which belongs to natural wood, naturally formed; for the desk, more attention should be paid to the color matching and texture of office furniture.

同時觀察辦公桌會不會出現板面傾斜、下沉、凹凸不平的現象，辦公家具的側邊、面、裝飾部件主要看其涂裝是否均勻，結構是否牢固、修邊是否平整光滑，零部件側板、門板、抽屜面板等端面是否完整、無間隙。

At the same time, observe whether the desk will appear slanting, sinking, uneven phenomenon. The side, surface and decorative parts of office furniture mainly depend on whether the painting is uniform, whether the structure is firm, whether the trimming is smooth, whether the side panels of spare parts, door panels, drawer panels and other end faces are complete and no gap.

安裝后辦公家具是否牢固，用手推動有沒有晃動現象。門、抽屜的縫隙是否過大，門和抽屜的開啟推拉是否靈活、無異響現象。

After installation, whether the office furniture is firm or not and whether it is shaking by hand. Whether the gap between the door and drawer is too large, whether the opening and pulling of the door and drawer are flexible and no abnormal noise.

對于怎么選購辦公家具我們介紹了很多，今天的這三方面也只是其中一小部分，更多的就不再一一介紹了，希望大家慎重選擇!

We have introduced a lot about how to buy office furniture. Today's three aspects are only a small part of it. More will not be introduced one by one. I hope you will choose carefully!